4Pcs Car Copper Tire Pressure Cap Monitoring Universal Sensor indicator Valve

Description:
1. The tire pressure cap is an auxiliary tool for measuring tire pressure. The tire pressure cap is locked on the tire nozzle. The color change in the transparent cover is directly visualized to determine whether the tire pressure is sufficient. Troublesome.
2. This product is an auxiliary tool for measuring tire pressure. The user locks the tire pressure cap on the tire valve, and directly observes the color change in the cover to determine whether the tire pressure is sufficient. A 15% reduction in tire pressure will cause your car to increase fuel consumption by 6% and double tire wear, increasing the risk by 30%. The tire cap will remind you of this.
Specifications:
– Product name: tire pressure monitoring cap
– Product material: stainless steel + PC
– Scope: most models (tire pressure 2.5bar)
– Features: 3-color display, automatic monitoring
– Size: 9x9x23mm/0.4×0.4×0.9inch
Features: Real-time monitoring at a glance, always know the tire pressure.
All vehicles, suitable for cars, SUVs, MPVs, trucks, etc.
Transparent PC cover, tire pressure at a glance.
The three-color warning is intuitive and clear. three-color cylinder displays the tire pressure and is automatically measured.
Anti-skid gear design, gear inlay increases friction, anti-slip in water.
Instructions for use:
1. Normal: Under the condition of standard tire pressure, the transparent window should be green and the vehicle is running normally.
2. Warning: The tire pressure is slightly lower than the standard by about 10%. The transparent window is yellow-green and should be inflated in time.
3. Danger: The tire pressure is about 25% below the standard. The transparent window should be yellow-red, and it should be checked and inflated immediately.
About tire pressure: Many car yards inflate cars in accordance with the 2.5bar standard. This tire pressure cap can be used.
Installation Steps:
1. Unscrew the existing bonnet
2. Adjust the tire pressure to the range recommended by the manufacturer. (The tire must be cold)
3. Screw the indicator cap onto the tire valve by hand
4. Regularly check the indicator cap
5. If the green drop shows red, the tire pressure is insufficient
6. Inflate the tire to the correct pressure
7. Keep the valve cover clean for easy inspection.
Note:
1. Please confirm whether the ‘tyre pressure cap’ is tight. When installing, please check whether the color circle is at the normal value.
Package Included:
1 X Set Monitoring Tire Pressure Cap(4pcs/set)