OBD KM10 12V Power Probe Automotive Circuit Tester Circuit Breaker Reader Voltage Current Test instrument

Description:
1.Kzyee KM10 super electrical probe diagnostic tool supports 12V and 24V electrical systems.
2.Built-in voltage & polarity, continuity, Trailer Lights and Connections as well as signal circuit testing. it can quickly
and accurately find trouble spot.
3.Activating components in the vehicle or W/Ground, reading voltage display red/green polarity LED, tracing & locating
short circuits, bad ground contacts.
Specifications:
Scope: 6-24V
Model: KM10
Display: TFT color display (160 x 128 dpi)
Operating Temperature: 0 to 60°C (32 to 140°F)
External Power: 12.0 or 24.0 V power provided via vehicle battery
Features:
1.Built-in flashlight enables you to work in the dark
2.LED screen allows you to read voltage, current and resistance at the fingertip.
3.Including Lighter adaptor, battery test clips, easy to get battery supply from the car
4.Test mode contain AV Voltage, DC Voltage, Current Resistance, LED, including most car circuit test system
5.Highly reliable and easy to use with 6 Meter long strong cable,convenient to test from the front to the rear of the car.
6.Circuit Breaker Protection: Ability to Power Up Components. Automatically shut-off if current exceeds 5 Amperes,
it design to protect an electrical circuit from damage caused by over-current, typically resulting from an overload or short circuit.
Functions:
1. Determine the positive, negative and open circuit quickly.
2. Read the AVO meter, voltage, current, and resistance easily.
3. Test the continuity of the power switch, relay and diode quickly.
4. Protect the tool from overload through the inner circuit breaker.
5. Allow you to work in the dark area by using the built-in head light.
6. Activate the components by using the hot line and ground lead simultaneously.
7. Test the bad ground contacts quickly, follow and locate short circuits without wasting the fuse.
8. Operate the tool without looking at the menu once users are familiar with the tone. Test along the vehicle by the long cable.
9. Perform these functions: power injection, measuring, ground testing, polarity checking, continuity testing and component activation.
10. Press the power switch lightly and get the instant heat ground lead to energize the electrical components, such as the cooling fan, relay etc.
Note:
This probe is very sharp on the pointed end, easily to get hurt. Better to be more careful when performing.
Package Included:
1 X KM10 Power Scan
1 X Rugged Blow Molded Case
1 X 20ft. Extension Cable
1 X Probe Tip
1 X Battery Hookup Clips
1 X Lighter Adapter
1 X User Manual