12/24V Car Battery Charger Smart Pulse Repair Lead-acid Battery Charger Silver High Power

Description:
1. Reverse connection protection. When the positive and negative poles are reversed,
a buzzer alarm is issued and the output is automatically stopped.
2. Low voltage protection. When the battery voltage is too low, it will stop charging automatically and issue a buzz alarm.
3. Short circuit protection. When the charger is shorted, the output is automatically turned off and a buzzer sounds.
4. Overcurrent protection. Automatically selectively cut off the faulted line when a phase-to-phase short-circuit fault occurs.
5. Overheating protection. When the charger temperature is too high, the charger will automatically shut down.
6. The 12V24V mainstream models are generally suitable for 6AH-400AH trucks, automobiles, motorcycles,
water and battery dry batteries, lead-acid batteries, lithium batteries, and maintenance-free batteries.
Specification:
Battery type: Lead-acid battery
Charging current: 15000 24v8000ma (mA)
Input parameters: 100v 220v 240v
Output parameters: 12v 24v automatic conversion
Discharge current: 15000 (mA)
Charging time: 6 (h)
Dimensions: 180 145 75 (mm)
Suggestions For Using:
1.Suggestions for Smart charging: Normal and good batteries use smart charging,
self-stop at full power, saving energy and convenience, protecting and extending battery life.
2.Suggestions for repair and charging: Old batteries that have lost electricity for too long and
have too much internal resistance. please use the repair charging mode to activate and
repair the internal resistance of the battery. Remember to use manual monitoring when
repairing and charging, and stop charging when the battery case has a slight temperature.
Note:
The first and second charging, if the battery has temperature, you should stop charging.
Any leaked battery will generate heat, and the leaked electricity will be converted into thermal energy.
The battery is deformed due to heat, so the micro-heat of the battery is another manifestation of full power.
The micro-heat battery has reached the optimal state then you need to unplug it immediately.
Do not overcharge to prevent damage to the battery.