Sc-440c Outboard Engine 4-Stroke 4.0 HP Air Cooled Hand Start

Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Description:
1.The four-stroke design is easy to repair
2.Low Noise Design(Less Than 85db)
3.Enhance Gear Design
Specifiction:
Model:4 Stroke 4.0HP
Displacement:55CC
Gear Ratio:2.08 (27:13)
Cylinder:1
Max. Speed:4500-5500 r/min
Max. Output Power:2.9KW
Gear Positions:Clutch Control
Ignition System:CDI
Cooling System:Air-Cooling
Control System:Tiller Control
Starting Way:Manual Start
Recommended Fuel: 92 Lead-free Gasoline
Recommended Propeller Size:3-7 1/4′ x 5′
Recommended Engine Oil:Four Stroke Engine Oil
Transom Plate Height:440mm
Trim and Tilt System:Manual Tilt
Bore x Stroke:44 x 33mm
Separating Fuel Tank:1.4L
Dimensions:365 x 220 x 920mm (L*W*H)
N.W.:12.5kg
Installation Instructions:
1.Install the air cover, pay attention to the sponge inside, in order to filter impurities
2.The sump fuel tank is separate and does not require a proportioning oil
3.The type of oil to be added must be in strict accordance with the specifications on the instructions for use
Special Attention:
Be sure to add oil before starting the engine. Pay attention to the oil content, not exceed the upper limit of the oil scale, not less than the lower limit of the oil scale
Note:
1.Before using our outboard engine, please read this manual carefully to understand the proper use of your unit.Keep this manual handy.Before start-up, manually pump the oil to reach the carburetor port
2.When the manual pump oil is pressed,observe whether the transparent bubble is completely filled.
If there is oil in the tubing to reach the carburetor port, it may be pressed five or six times
3.After the start is started, the switch starts and the long press is turned off
4.Always check the amount of oil in the sump before each use
Package Included:
1 X:Outboard Machine ＆ Accessories
1 X:The Instructions