Solar Car Fan Double Duct Exhaust Cooler Radiator Window Exsufflation Ventilation

Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Specification:
Name: Car cooling fanMaterial: ABS
Color: black, white
Uses: vehicle cooling
Power: 1.5 (W)
Battery: Built-in 1200MAH lithium ion battery
Feature:
1. Energy saving. After the car is exposed to the sun outdoors, the temperature inside the car is at a high temperature. It takes a period of time after each drive, and the cold air in the car will work. With it, it can double cool your car, cool and energy-saving
2. Protection circuit. The electrical and electronic products in the car will affect its performance and service life due to high temperature
3.Health. Air convection is beneficial to your health, allowing you and your family to enjoy a non-toxic and harmless driving environment
4. Deodorization. Keep the smell of smoke out of the car and keep the air in the car fresh.
5. Detox. Excessive temperature in the car will release excessive formaldehyde, keeping the temperature in the car cool will help reduce the release of formaldehyde.
Directions for Use:1. Make sure the indicator light is on after the installation. If it’s bright, the solar panel is generating electricity.
2. The three toggle switch to the open position. Press the rightmost button switch, so that three fan work at the same time. The left three toggle switch control three fan head from left to right. The riaht button switches have three gear.The fan starts to work when you press one time. Press again after the indicator light, the fan to stop working. The indicating keeps lighting, solar panels in charge at this time. Press again, the light is turned off, all the power supply shut down.
3. Normally, the solar panel recharges the nickel-hydrogen battery when the fan stops working and the light is on.
Installation Instractions:
1. It is generally recommended to install it on the window of the driver’s cab. Pull down the window, and fix the short tape from the outside of the window.
2. Put the solar energy vehicle ventilation fan on the inside of the door, At one end of which is attached to the short rubber strip gap.
3. Cut the appropriate length according to the length of the window on the long tape. And fix it on the window.
4. Press the car ventilator against the window in the door so that it fits the gap between the tapes on both sides.
5. Close the window slowly so that the positioning pin is fixed in the groove of the tape on the upper edge of he window frame.
6. Adjust the Angle of the solar panel so that it can reach the sun. Give the solar panel fully light and charge the nickel hydrogen battery.
Package Included:
1 X Car Cooling Fan