Assign Above header menu
Category

Universal Car Boat LED Key Ignition Switch Panel Barrel Engine Start 2-Position

SKU: YDJO-1465786

$34

Dispatch:Usually will be shipped in 24 hours
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard

Specification:
Faceplate: Nylon
Switch Ratings: DC 12V
Panel Rating: 10 A
Product Dimensions: (W x H) 69 x 69mm
Mounting Depth: 45mm
Panel Cut-out: diameter 40 mm
Installation Instruction:
1. Disconnect all power(AC& DC) Disconnect positive cables from all batteries and AC shore power cord from the yacht.
2. Cut opening for mounting location,Using the mounting dimensions provided to measure and cut out the mounting hole in the
surface where the panel is to be mounted.
3. Connect Positive and Lamp negative feed wire Connect the DC power source(the batteries) to the screw terminal away from the LED. Then connect
the LED negative wire (black) to a DC negative bus bar.
4. Connect the LED positive wire and devices,Connect the LED positive wire (red) to screw,terminal near the LED. Connect the device or
distribution panels to the same screw terminal.
5. Mount the switch panel Clean the surface where the panel is to be mounted carefully. Place the panel and screw down the panel
to the mounting surface as tight as possible with self-tapping screws.
6. Reconnect and Test Reconnect all the AC& DC powers to supply power to the panel. Turn on and off all branch circuits to check if the panel works normally.
Package Included:
1 X Ignition Switch Panel

Weight 0.157 kg

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

SKU: YDJO-1465786 Category:

Related products

Customers Also Viewed

Subscribe