2Pcs Car HID Xenon Headlights Fog Lamp Super Mini Xenon Light Bulbs Set 55W 3200LM 6000K/8000K

2Pcs Car Xenon Headlights Fog Lamps HID Bulbs Super Mini Xenon Lights Set 55W 3200LM 6000K/8000K
Specification:
Voltage input::9-16V
Voltage range::13.2V
Current specification::4.2A
Maximum current::6A
Power output::55W
Working temperature::-40~ + 105 Centidrgee
HID efficiency::98.68%, 3,200 LM.
Life expectancy::3,000 hours
Certification::E4 and ISO-9001: 2000 approval
Bulb size::H1, H3, H7, H8, H9, H10, H11, 9005 / HB3, 9006 / HB4, 880, 881
Color temperature available::6000K, 8000K
Ballast power::55W
Installation guide:
Please read this guide before attempting to install. By reading the outlined steps, you will be more prepared to install to reduce possible errors and problems. If you have any questions, please contact us.
Common tips:
-Make sure your engine compartment is cool.
-Make sure the car is parked and closed.
-Be careful not to squeeze or cut the lamp wiring..
-Do not connect the high voltage electrode when the light switch is turned on.
-It is recommended to test each lamp function before final permanent installation.
-Do not install the ballast near extreme heat or vibration, as it will shorten its life.
Common problem:
– The light is not bright. Solution: The ballast plugs have the opposite polarity. This simply means flipping the
elliptical plug inserted into the ballast. Unlike conventional halogen bulbs, the polarity of the ballast (-/+) is sensitive.
Retest. If the problem persists, replace the ballast or lamp to diagnose the lamp or ballast. In many cases, it is not the HID kit,
but the culprit of the vehicle. Some vehicles, such as For Chrysler/Dodge/Jeep/BMW/Mercedes, may require additional
wiring/eliminator plugs to mount the HID.
– The light will then illuminate, flash or quickly turn off. Solution: In many cases, the HID kit is not the culprit, but the vehicle.
Some vehicles, such as for Chrysler/Dodge/Jeep/BMW/Mercedes, may require additional wiring/eliminator plugs to mount the HID.
Note:
– This kit contains everything you need to upgrade your existing car headlamp system to optimal lighting!
(Single beam does not require relay harness)
– The kit rectifier uses the world’s most advanced chip technology, MINI integrated design ballast / rectifier (rectifier volume is only 5.5 * 2.8 * 3CM).
– Integrating more high-quality components greatly enhances the life and stability of the product. Greatly reduce the volume
of the ballas and reduce the space occupied by the car. Make installation easier and faster.
Parts included with the kit:
2 x xenon lamp, also known as HID bulb, with wiring
2 x ballast
All necessary wiring and connectors